Using DISM to install Storage Drivers

If you migrate Windows installations between storage adapters, you’re often left with the well known STOP 0x7B INACCESSIBLE_BOOT_DEVICE.

This happens because Windows doesn’t yet have the required drivers installed, and/or set as boot-critical.

The dism.exe tool allows us to install (boot-critical) drivers into an offline Windows “image”. Note that an offline Windows “image” is nothing special - a regular Windows install is a valid Windows “image”.

After a STOP 0x7B, Windows Boot Manager usually sets up fallback boot into WinRE (Windows Recovery Environment). WinRE has a copy of the DISM tool, so you’re good to go. (Cancel the Startup Recovery assistant if you have to.)

Example DISM command to use from the WinRE (or WinPE) Command Prompt:

    dism /image:d:\ /add-driver /driver:e:\ /recurse
This post is licensed under CC BY 4.0 by the author.